White primer-base SILK PLASTER 5kg
White primer is a bonding primer designed to improve adhesion between old and dried substrates and new substrates, plasters, plasters and any other surfaces. It is also used as a bonding layer between old concrete and new concrete, plaster (cement or gypsum), fixing gypsum board with gypsum adhesive, gluing a tile on a slab, priming gypsum board, etc.
White primer base is ready for use. Stir well before application since the primer contains fine sand that precipitates. Do not dilute with water.
Apply with a brush or roller on a dust-free and greasy base. Allow to dry before commencing subsequent work on the primer layer. Under optimal conditions, the primer should dry 2-4 hours before further treatment. After drying, the primed surface becomes rough due to the fine grains that are added to the primer. It is advisable to lay a next coat immediately after drying to avoid adhering dust.
Acrylate dispersion, marble granules, preservatives and additives.
12 months from date of production
from 250-350gr.m2 depending on the base
At 20 ° C 1-1.5 hours
In an indoor and dry place at a temperature of + 5 ° C to + 30 ° C.
P102 - Keep out of the reach of children.
P302 + 352 - In case of contact with skin: rinse thoroughly with soap and water. Maximum VOC content for this product (cat: A / g) is 25g / l.