Primer contact SILK PLASTER 0,9 kg
Directions for use
It is used for priming walls with gypsum plaster, lime plaster, concrete and gypsum fiber to increase the strength and reduce porosity. It is applied before painting with water-dispersion acrylate paints (latex, phasogen, etc.). ratio 1: 3 to 1: 6 depending on the state of the walls, then stir vigorously for 5 minutes.
to 30-40 m2 / kg (1: 6)
At 20 ° C - 1-2 hours
At a temperature not lower than 0 ° C
12 months from date of production
Finnomicronized styrolacrylate dispersion, chalk and fillers.
P102 - Keep out of the reach of children
P302 + 352 - In contact with skin
Wash plenty of soap and water
The maximum VOC content for this product (A / g) is 25 g / l